Prerequisites
l You have used a VGA cable to connect the video output port of the presentation source to
the TE30 VGA IN port.
l H.239 has been enabled on your TE30. For details, see Table 6-2.
Background
During a dual-stream conference using H.239, two independent channels of video streams (that
is, the video and presentation) can be transmitted.
If Presentation plug-and-share listed in Table 6-2 is set to Enable, your Te30 automatically
shares presentations with remote sites once presentation input is detected.
Procedure
Press on the remote control to share a presentation.
To stop sharing a presentation, press on the remote control.
To select a presentation source or stop sharing a presentation, you can also select on the
option bar and then the desired operation.
6.5 Creating a Favorite Conference
If you need to regularly join certain conferences, you can save those conferences as favorite
conferences. You can then quickly join a favorite conference without resetting conference
parameters.
Procedure
Step 1 Choose Advanced Settings > Conference Schedules > Conference.
Step 2 Select Create.
Step 3 Select Add Site.
You can add sites by selecting Address Book, Others, or LDAP Address Book.
Step 4 On the Options screen, set the conference parameters by referring to Table 6-3.
Table 6-3 Conference parameters
Parameter
Description Setting
Rate Specifies the transmission rate
for the conference.
The default value is 1920kbps.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 6 Conference
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
53
To Next Page
Loading...
Need help?
General
