Step 3 Select Save.
In the Connected devices list box, you can view the MAC and IP addresses of all the devices
connected to your TE30.
----End
3.5 Setting QoS Parameters
Quality of service (QoS) settings determine the mode for processing IP data packets during a
conference.
Procedure
Step 1 Choose Advanced Settings > Settings > Security > QoS. Set the QoS parameters by referring
to Table 3-5.
Table 3-5 QoS parameters
Parameter Description Setting
QoS type Specifies the QoS type.
l Priority: If you select this option, you
must also set IP priority and Service
type.
l DiffServ: If you select this option, you
must also set DSCP. DSCP stands for
differentiated services code point.
The default value is Priority.
IP priority Specifies the priority that a network
device gives to forwarding the data
packets sent by your TE30. A larger value
indicates a higher priority.
Value range: 0-7
The default value is 7.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 3 Network
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
23
To Next Page
Loading...
Need help?
General
