Parameter Description Setting
Noise reduction Removes noise artifacts from
video. A larger value causes the
video to have less noise but detail
may also be lost.
The default value is Low.
Video resolution Specifies the video output
resolution for the camera.
The default value is 1080P
60Hz.
Image inversion Specifies whether the video input
from the camera is rotated by 180
degrees.
If the video is displayed in a
reverse direction, you can enable
this function.
The default value is Disable.
VGA IN
Brightness Specifies the video output level
that changes the brightness of the
video displayed on the monitor.
The brightness increases with this
value.
Value range: 0-100
The default value is 50.
Contrast Adjusts color levels to facilitate
the distinction between two
colors.
If the contrast is higher, the
difference between the light and
dark extremes of a color is more
distinct.
Value range: 0-1000
The default value is 500.
Saturation Adjusts the grayscale of each
color.
The higher the saturation, the
brighter a color.
Value range: 0-100
The default value is 50.
Hue Adjusts the video color shade. Value range: 0-360
The default value is 0.
8.1.4 Customizing Onscreen Status Icons
You can customize the status icons to be displayed on screens.
Packet Loss Rate Icon
To set thresholds (A and B) for the packet loss rate, choose Advanced Settings > Settings >
Display > Packet Loss Threshold.
By comparing the packet loss rate on the current network with threshold A and threshold B, the
TE30 determines whether to display the packet loss rate icon on the remote controlled UI. The
policy is as follows:
HUAWEI TE30 Videoconferencing Endpoint
User Guide 8 Video and Audio
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
75
To Next Page
Loading...
Need help?
General
