Huawei V100R001 Maintenance Guide

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
2 Routine Maintenance
Issue 01 (2019-03-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32
2.6.6 Routine Maintenance for the Smart ETH Gateway
Table 2-20 Routine maintenance for the smart ETH gateway
Maintenance
Item
Maintenance
Period
Operation
Standard
Troubleshooti
ng
Check the
indicator on the
smart ETH
gateway.
Quarterly
Observe the
PWR, RUN,
and ALM
indicators.

If the green
PWR
indicator is
steady on,
the power
input is
normal.

If the RUN
indicator is
off, the
power is
abnormal. If
the RUN
indicator
blinks
slowly, the
multi-functi
onal sensor
is running
normally. If
the RUN
indicator
blinks at
short
intervals, the
communicat
ion is
interrupted.

The ALM
indicator is
off.

If the PWR
indicator is
off, check
whether the
48 V power
cable and
connectors
are normal.
If not,
reconnect
them. If so,
replace
them.

If the RUN
indicator
blinks at
short
intervals,
check
whether the
communicat
ions cable is
loose or
disconnecte
d. If so,
reconnect
the cable. If
not, replace
the cable.

If the ALM
indicator is
steady on,
clear the
alarm by
referring to
ECC800
Alarm
Reference
V100R001.
Check the
availability of
the smart ETH
gateway.
Semi-annually
On the WebUI
of the ECC800,
choose
Monitoring >
System >
Smart ETH
Gateway
On the WebUI
of the ECC800,
check that the
PoE port
connection and
power supply in
the smart ETH
If the PoE port
connection and
power supply in
the smart ETH
gateway is not
normal, check
whether the

Huawei V100R001 Specifications

General

Brand	Huawei
Model	V100R001
Category	Wireless Router
Language	English