Husqvarna Auto Mower User Manual

Name: Husqvarna Auto Mower
Brand: Husqvarna
Rating: 4 (1 reviews)

51 pages

To Next Page

To Previous Page

English-23

INSTALLATION

F. Connecting the boundary wire

Connect the boundary wire to the charging station:

1. Lift up the cover on the charging station:

• Grip under the edge of the cover with both

hands and pull straight out towards the sides.

• Now lift the cover straight up.

2. Slide in the ends of the boundary wire in the low-

ermost holes on the charging station and catch

them in the uppermost holes.

The right hand wire end should be inserted in the

right hand hole and the left hand wire end in the

left hand hole.

3012-268

3012-269

3012-266

IMPORTANT INFORMATION

The boundary wire must not be crossed when

connecting to the charging station. Therefore

the right hand wire end must be connected to

the right hand connector on the charging station

and vice versa.

3012-303

Other manuals for Husqvarna Auto Mower

Need help?

Do you have a question about the Husqvarna Auto Mower and is the answer not in the manual?

General