Hypertherm MAXPRO200 User Manual

54 MAXPRO200 Instruction Manual 807700 Revision 1
Installation
Connect the torch to the quick-disconnect receptacle
Align the torch body to the quick disconnect receptacle and connect them by screwing completely together. Apply a thin
film of silicone lubricant to each o-ring. The o-rings should look shiny, but there should not be any excess or built-up
lubricant.
Be certain that there is no space between the torch body and the o-ring on the quick-disconnect.

Hypertherm MAXPRO200 Specifications

General

Brand	Hypertherm
Model	MAXPRO200
Category	Welding System
Language	English