Hypertherm MAXPRO200 User Manual

72 MAXPRO200 Instruction Manual 807700 Revision 1
Installation
Gas regulators
Note: A separate gas regulator is needed only when cutting with oxygen.
Use a high-quality, 1-stage, gas regulator to maintain consistent gas supply pressure, if using liquid cryogenic or bulk
storage. Use a high-quality, 2-stage, gas regulator to maintain consistent gas supply pressure from high pressure gas
cylinders.
The high-quality gas regulators listed below are available from Hypertherm and meet U.S. Compressed Gas Association
(CGA) specifications. In other countries, select gas regulators that conform to national or local codes.
Part number Description
128544 Kit: Oxygen 2-stage regulator*
128548 Kit: Oxygen 1-stage regulator (for use with cryogenic liquid nitrogen or oxygen)
022037 2-stage oxygen regulator
* Kit includes the 2-stage regulator (022037) and the appropriate fittings
2-stage regulator
1-stage regulator

Hypertherm MAXPRO200 Specifications

General

Brand	Hypertherm
Model	MAXPRO200
Category	Welding System
Language	English