1. TRANSMISSION DISASSEMBLY
Electro-hydraulic control and filter
(exchange filter)
Mount the transmission to the assembly
truck.
(S)Assembly truck 5870 350 000
(S)Holding fixture 5870 350 124
Prior to start the disassembly, drain the
oil
3-57
GROUP 3 DISASSEMBLY AND ASSEMBLY
①
※
Removal of the filter
By means of the strap wrench separate
the filter(1) from the filter head.
(S)Strap wrench 5870 105
005
(1)
Loosen the cap screws(2) and separate
the filter head(1) from the transmission
housing.
Remove the O-ring
(S) Socket spanner 5873 042 004
To Next Page
Loading...
Need help?
General
