4-18
Multimedia System
Turning on the radio
1. On the control panel, press the
[RADIO] / [AUDIO] button.
2. When the mode selection window
displays, turn the [TUNE] knob to
select the desired radio mode and
then press the knob.
FM/AM Mode
(1) Current radio mode
(2) Radio station information
(3) Preset list
Press the [MENU/CLOCK] button on
the control panel to access the fol-
lowing menu options:
• Autostore: Save radio stations to
the preset list.
• Scan: The system searches for
radio stations with strong radio sig-
nals and plays each radio station
for about five seconds.
• Sound settings: You can change
the settings related to sounds,
such as location where sound will
be concentrated and the output
level for each range.
- Position: Select a location where
sound will be concentrated in the
vehicle. Select Fade (Fader) or
Balance, turn the [TUNE] knob to
select the desired position, and
then press the knob. To set sound
to be centred in the vehicle,
select Centre(Center).
- Equaliser (Tone): Adjust the out-
put level for each sound tone
mode.
- Speed dependent vol.: Set the
volume to be adjusted automati-
cally according to your driving
speed. (if equipped)
• Depending on vehicle models or
specifications, available options
may vary.
• Depending on the system or
amplifier specifications applied
to your vehicle, available options
may vary.
• Mode popup: Set to display mode
selection window when the [RADIO]
/ [AUDIO] button is pressed on the
control panel.
• Date/Time: You can change the
date and time that are shown on
the system display.
- Set date: Set date to display on
the system display.
- Set time: Set time to display on
the system display.
- Time format: Select to display
time in the 12 hour format or the
24 hour format.
- Display (Power Off): Set to dis-
play the clock when the system
power is off.
• Language: You can change the
display language.
NOTICE
RRAADDIIOO
To Next Page
Loading...
Need help?
General
