7-35
7
Maintenance
Blade replacement
When the wipers no longer clean
adequately, the blades may be worn
or cracked, and require replacement.
Type A
1. Raise the wiper arm and turn the
wiper blade assembly to expose
the plastic locking clip.
2. Press the clip and slide the blade
assembly downward.
3. Lift it off the arm.
4. Install the blade assembly in the
reverse order of removal.
OLMB073020
Do not allow the wiper arm to fall
against the windshield, since it
may chip or crack the windshield.
CAUTION
OLMB073021
OLMB073022
To Next Page
Loading...
Need help?
General
