4-30
Multimedia System
Deleting paired devices
If you no longer want a Bluetooth
device paired or if you want to con-
nect a new device when the
Bluetooth device list is full, delete
paired devices.
1. From the control panel, press the
[PHONE] button, and then select
Phone Delete devices.
2. Turn the [TUNE] knob to select the
device to delete, and then press
the knob.
3. Press the [1 RPT] button to select
Yes.
• When you delete a paired device,
the Call history and Contacts
stored in the system are also
deleted.
• To re-use a deleted device, you
must pair the device again.
Using a Bluetooth audio
device
You can listen to music stored in the
connected Bluetooth audio device
via your vehicle’s speakers.
1. On the control panel, press the
[MEDIA] / [AUDIO] button.
2. When the mode selection window
displays, turn the [TUNE] knob to
select Bluetooth audio and then
press the knob.
(1) Information about the song cur-
rently playing
1. Press the [MENU/CLOCK] button
on the control panel to access the
following a menu option.
2. Turn the [TUNE] knob to select
option and then press the knob.
• Sound settings: You can
change the settings related to
sounds, such as location where
sound will be concentrated and
the output level for each range.
- Position: Select a location
where sound will be concentrat-
ed in the vehicle. Select Fade
(Fader) or Balance, turn the
[TUNE] knob to select the
desired position, and then
press the knob. To set sound to
be centred in the vehicle, select
Centre(Center).
- Equaliser (Tone): Adjust the
output level for each sound
tone mode.
- Speed dependent vol.: Set
the volume to be adjusted
automatically according to
your driving speed.
• Depending on vehicle models or
specifications, available options
may vary.
• Depending on the system or
amplifier specifications applied
to your vehicle, available options
may vary.
NOTICE
NOTICE
To Next Page
Loading...
Need help?
General
