5-101
Driving your vehicle
5
LKA operation
To activate/deactivate the LKA sys-
tem:
With the ignition switch in the ON
position, LKA turns on automatically.
The indicator ( ) in the cluster
display will initially illuminate white.
This indicates the LKA system is in
the READY but NOT ENABLED
state.
If you press the LKA button located
on the instrument panel on the lower
left hand side of the driver, LKA will
be turned off and the indicator on the
cluster display will go off.
• The system detects lane
markers and controls the
steering wheel by a camera,
therefore, if the lane markers
are hard to detect, the system
may not work properly.
Please refer to "Limitations of
the system".
• Do not remove or damage the
related parts of LKA system.
• You may not hear a warning
sound of LKA system because
of excessive audio sound.
• If any other warning sound
such as seat belt warning
chime is already generated, the
Lane Keeping Assist (LKA) sys-
tem warning may not sound.
• Do not place objects on the
dashboard that reflects light
such as mirrors, white paper,
etc. The system may malfunc-
tion if the sunlight is reflected.
• Always have your hands on
the steering wheel while the
LKA system is activated.
• The steering wheel is not con-
tinuously controlled so if the
vehicle speed is at a higher
rate when leaving a lane the
vehicle may not be controlled
by the system. The driver
must always follow the speed
limit when using the system.
• If you attach objects to the
steering wheel, the system
may not assist steering or the
hands off alarm may not work
properly.
• When you tow a trailer, make
sure that you turn off the LKA
system.
OAD058126L
To Next Page
Loading...
Need help?
General
