7-80
Maintenance
8.Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
Stop lamp and tail lamp
If the lamp (LED) does not operate,
we recommend that the system be
checked by an authorized HYUNDAI
dealer.
The LED lamps cannot be replaced
as a single unit because it is an inte-
grated unit. The LED lamps has to be
replaced with the unit.
A skilled technician should check or
repair the LED lamp, for it may dam-
age related parts of the vehicle.
Back-up lamp
If the lamp does not operate, we rec-
ommend that the vehicle be checked
by an authorized HYUNDI dealer.
Fog lamp (if equipped)
If the lamp does not operate, we rec-
ommend that the vehicle be checked
by an authorized HYUNDI dealer.
High mounted stop lamp
replacement
1.Open the trunk.
OAD078041N
OAD075042
To Next Page
Loading...
Need help?
General
