IBM iSeries 800 Analyze Hardware Problems (System Reference Codes

(2748, 2757, 2763, 2778, 2782, 5703) Reference Codes
If the error is reported on the control panel, the unit reference code is characters 5
through 8 of the top 16 character line of function 11. If the error is reported on the
console, the unit reference code is the 4 rightmost characters of word 1.
Find the unit reference code in the following table.
For more on the Failing Item column entries, see Table 2. Failing Items Details,
which follows the reference code table below.
Table 1. (2748, 2757, 2763, 2778, 2782, 5703) Reference Codes
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
3006 System bus error IOP
ANYBUS
STORIOA
3020 I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 0. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
USER
FI01107
STORIOA
3021 I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 1. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
USER
FI01107
STORIOA
3022 I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 2. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
USER
FI01107
STORIOA
3023 I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 3. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
USER
FI01107
STORIOA
3100 I/O processor card detected interface error
Error occurred on SCSI bus 0.
Perform SDIOP-PIP13.
FI01107
STORIOA
FI01140
BACKPLN
3101 I/O processor card detected interface error
Error occurred on SCSI bus 1.
Perform SDIOP-PIP13.
FI01107
STORIOA
FI01140
BACKPLN
3102 I/O processor card detected interface error
Error occurred on SCSI bus 2.
Perform SDIOP-PIP13.
FI01107
STORIOA
FI01140
BACKPLN
3103 I/O processor card detected interface error
Error occurred on SCSI bus 3.
Perform SDIOP-PIP13.
FI01107
STORIOA
FI01140
BACKPLN
2748, 2757, 2763, 2778, 2782, 5703
140
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries 800 Specifications

General

Brand	IBM
Model	iSeries 800
Category	Server
Language	English