IBM iSeries 800 Analyze Hardware Problems (System Reference Codes

Failing Item Description Document Description
CNGEORT EORTBL value in CRTLINASC command Communications Configuration
CNGFLOC FLOWCNTL value in CRTLINASC command Communications Configuration
CNGLBPS LINESPEED, BITSCHAR, PARITY, STOPBITS
values in CRTLINASC
Communications Configuration
CNGLOAD System processor workload heavy Communications Configuration
CNGMAXI MAXBUFFER value in CRTLINASC command Communications Configuration
CNGMCFL DUPLEX, CNN, MODEMRATE values in
CRTLINASC command
Communications Configuration
CNGPRTY PARITY value in CRTLINASC command Communications Configuration
CNGRMTA RMTANSTMR value in CRTLINASC command Communications Configuration
CNGSLPT RSRCNAME value in CRTLINASC command Communications Configuration
CNGSTOP STOPBITS value in CRTLINASC command Communications Configuration
CNGTEL CNNNBR value in CRTCTLASC command Communications Configuration
CNGTEMP No failure found Communications Configuration
CNGTHRS THRESHOLD value in CRTLINASC command Communications Configuration
CNGTMOD DUPLEX, ECHO, FLOWCNTL value in
CRTLINASC command
Communications Configuration
GNGLINK External devices or network
GNGRESC Line or automatic call unit already in use
UNGUPPR User suspected communications problem.
(B006) Common Licensed Internal Code Reference Codes
The common Licensed Internal Code detected a failure.
1. Look at charcters 5 through 8 of the top 16 character line of function 11 (4
rightmost characters of word 1). These 4 characters are the unit reference code.
2. Find the unit reference code in the following table.
For more on the Failing Item column entries, see Table 2. Common Licensed
Internal Code Failing Items Details, which follows the reference code table below.
Table 1. (B006) Common Licensed Internal Code Reference Codes
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
1201 I/O processor resource not available
A deactivation failed to get a resource controlled by Licensed Internal
Code.
AJEQU00
AJDG301
1202 Not valid condition in I/O Processor Licensed Internal Code
An error in an activation or deactivation occurred.
AJEQU00
AJDG301
FI00131
1203 I/O processor resource not available
A resource needed to perform a requested function is not available in the
Licensed Internal Code.
AJEQU00
AJDG301
B003
208
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries 800 Specifications

General

Brand	IBM
Model	iSeries 800
Category	Server
Language	English