IBM iSeries 800 Analyze Hardware Problems (System Reference Codes

(3494) Tape Library Reference Codes
A tape or a tape library failure occurred.
Note: For tape device and IOP reset procedures, see TU-PIP4.
1. Is the operating system available, and can you enter commands from the
command line?
v Yes: Is OS/400 available on the system (see “Determining the Dominant
Operating System” in the iSeries Service Functions)?
– No: Continue with the next step.
– Yes: Use the online problem analysis procedures to isolate the problem.
Use the Work with Problem (WRKPRB) command to determine if a recent
problem was entered in the problem log, or use the Verify Tape (VFYTAP)
command to run verification tests.
v No: Continue with the next step.
2. Find the unit reference code in the following table.
For more on the Failing Item column entries, see Table 2. Tape Library Failing
Items Details, which follows the reference code table below.
Table 1. (3494) Tape Library Reference Codes
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
2301 Library device failure
Library attachment facility equipment check.
Use the 3494 Tape Library Dataserver Maintenance Information and follow
the procedures for analyzing a ″LIBRARY PROBLEM - NO ERROR
MESSAGE.″
3494
2303 Library device failure
Device control unit and library manager Licensed Internal Code are
incompatible.
Use the 3494 Tape Library Dataserver Maintenance Information and follow
the procedures for analyzing a ″LIBRARY PROBLEM - NO ERROR
MESSAGE.″
DHALIBC
DHADEVC
2306 to 2307 Library device failure
Library vision failure.
Use the 3494 Tape Library Dataserver Maintenance Information and follow
the procedures for analyzing a ″LIBRARY PROBLEM - NO ERROR
MESSAGE.″
3494
2308 Library device failure
Library manager equipment check.
Use the 3494 Tape Library Dataserver Maintenance Information and follow
the procedures for analyzing a ″LIBRARY MANAGER HARDWARE
PROBLEM″
3494
3494
162
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries 800 Specifications

General

Brand	IBM
Model	iSeries 800
Category	Server
Language	English