IBM iSeries 800 Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
00A7 The system is running on the Battery Power Unit.
No action required. This reference code is logged for information only.
00A8 The Battery Power Unit is not fully charged.
No action required. This reference code is logged for information only.
00A9 Battery Power Unit test is in process.
No action required. This reference code is logged for information only.
00AA Download in process
No action required. This reference code is logged for information only.
00AB Rack UEPO switch is OFF.
Informational reference code.
The UEPO switch must be returned to the On position to power on the
rack.
TWRCARD
CTLPNL
6462417
00AC Detected AC loss
If system powers on normally or stays powered on after AC power failure,
no replacement of parts may be needed.
ACMODUL
00BA The system is running on the Battery Power Unit.
No action required. This reference code is displayed for information only.
00BC Battery Power Unit test is in process.
No action required. This reference code is displayed for information only.
00CA CPM power down is complete.
No action required. This reference code is displayed for information only.
00EF Remote EPO switch is OFF
0100 Install Disk Unit 1
Concurrent maintenance informational reference code.
0101 Install Disk Unit 2
Concurrent maintenance informational reference code.
0102 Install Disk Unit 3
Concurrent maintenance informational reference code.
0103 Install Disk Unit 4
Concurrent maintenance informational reference code.
0104 Install Disk Unit 5
Concurrent maintenance informational reference code.
0105 Install Disk Unit 6
Concurrent maintenance informational reference code.
0106 Install Disk Unit 7
Concurrent maintenance informational reference code.
1xxx
System Reference Codes 11

IBM iSeries 800 Specifications

General

Brand	IBM
Model	iSeries 800
Category	Server
Language	English