Table 41. FCs for the frame models of the TS4500 tape library (continued)
FC Model CSU Description
1407 L25, L55 No LTO-6 and LTO-7 tape drive support
This triggers the shipment of an L6 CE
cartridge. When model L55 is ordered, a
minimum of one of FC 1405 or 1407 is
required but both can be selected. When
FC 9080 (Mixed Media) is ordered for
model L25, a minimum of one of FC 1405
or 1407 is required but both can be
selected.
1408 L25, L55 No LTO-7 and LTO-8 tape drive support
This triggers the shipment of an L7 CE
cartridge. When model L55 is ordered, a
minimum of one of FC 1407 or 1408 is
required but both can be selected. When
FC 9080 (Mixed Media) is ordered for
model L25, a minimum of one of FC 1407
or 1408 is required but both can be
selected.
1450 D25, D55 No TS4500 frame control assembly (FCA)
1442 HA Kit w/Second Accessor No Dual Accessors
This triggers the shipment of
v Four CE/diagnostic cartridges (two of
latest generation for both LTO and 3592)
v Service Bay Stop-A and Service Bay
Stop-B related parts
v TS4500 Accessor B including scanner,
enhanced grippers, and enhanced node
cards
There is a maximum of one HA kit (1442)
per library.
1460 L25, L55 No Redundant Accessor Power/Network
This provides power and internal network
redundancy for the L25/L55 frame. This is
a prerequisite to FC 9002.
1521 D25, D55,
L25, L55
No First TS4500 quad drive mounting kit
Prequisite: FC 1450 (for Dx5 frame models
only)
1522 D25, D55,
L25, L55
No Second TS4500 quad drive mounting kit
Prerequisite: FC 1521. This feature is not
supported if frame is used as ISB.
1523 D25, D55,
L25, L55
No Third TS4500 quad drive mounting kit
Prerequisite: FC1522. This feature is not
supported if frame is used as an ISB.
1524 D25, D55,
L25, L55
Both Fourth TS4500 quad drive mounting kit
Prerequisite: FC1523. This feature is not
supported if the frame is used as an ISB.
98 IBM TS4500: Introduction and Planning Guide
To Next Page
Loading...
Need help?
General