Recommended customer circuit breakers for the TS4500 tape
library frame models
Maximum rating Minimum rating
20 A (32 A if feature 1951 is installed) 10 A (20 A if feature 1951 is installed).
Feature codes for the TS4500
Order feature codes to install components in library frames or to enhance the
capacity or capabilities of the library.
A customer-setup unit (CSU) is a feature that you, as the customer, can install
when the feature is ordered as a field upgrade. If you choose not to install a CSU,
IBM can install it for an extra charge. However, detailed installation instructions
are included for most features when you order and receive these features. To
access the instructions for installing a CSU online, go to the Support Portal for the
TS4500 Tape Library and choose Plan and install documentation.
Table 41. FCs for the frame models of the TS4500 tape library
FC Model CSU Description
0983 Lx5, Dx5 No TAA compliance
1404 L52 No TS1140 and TS1150 tape drive support
This triggers the shipment of a JK
diagnostic cartridge. When model L25 is
ordered or when FC 9080 (Mixed Media) is
ordered for model L55, a minimum of one
of FC 1404 or 1406 is required but any may
be selected.
1405 L25, L55 No LTO-5 and LTO-6 tape drive support
This triggers the shipment of an L5
diagnostic cartridge. When model L55 is
ordered, a minimum of one of FC 1405 or
1407 is required but both can be selected.
When FC 9080 (Mixed Media) is ordered
for model L25, a minimum of one of FC
1405 or 1407 is required but both can be
selected.
1406 Lx5 Both TS1150 and TS1155 tape drive support
This triggers the shipment of a JL CE
cartridge. When model L25 is ordered or
when FC 9080 (Mixed Media) is ordered
for model L55 a minimum of one of FC
1404 or 1406 is required but any may be
selected.
Chapter 2. Planning 97
To Next Page
Loading...
Need help?
General