Tables
1. Authorized suppliers of custom bar code
labels .............. xvi
2. Comparison of binary and decimal units and
values .............. xvii
3. Percentage difference between binary and
decimal units ........... xviii
4. IBM TS4500 tape library at a glance ..... 4
5. TS4500 tape library frame models ..... 6
6. I/O stations and display panel ...... 16
7. Cartridge magazine physical specifications 17
8. Tape drives that are supported by the TS4500
tape library ............ 18
9. Features of the 3592 tape drive ...... 21
10. Capacity of LTO tape cartridges...... 26
11. Capacity of 3592 tape cartridges...... 27
12. Mixing drives in the physical frames of the
TS4500 tape library .......... 32
13. Compatibility among LTO tape drives and
tape cartridges ........... 33
14. Cartridges that are compatible with 3592 tape
drives .............. 34
15. Cartridges that are compatible with 3592 tape
drives .............. 34
16. Differences between CPF and DPF ..... 48
17. HD CoD capacity .......... 51
18. System console and remote support features 52
19. Remote support capabilities ....... 54
20. Default system console ports for outbound and
bidirectional data to and from RETAIN ... 55
21. Port information for firewall environments 56
22. Network ranges for prefix lengths of IPv6
addresses ............. 64
23. Performance specifications of the LTO tape
drives .............. 65
24. Performance specifications of the 3592 tape
drive............... 66
25. Rewind times for the 3592 tape drive .... 66
26. Average block locate time from load point for
3592 tape cartridge in 3592 tape drive.... 67
27. Typical time required for the TS4500 tape
library to inventory cartridges ...... 68
28. Typical time required for the TS4500 tape
library to inventory all tiers ....... 69
29. Mount performance for a TS4500 tape library
with all mounts coming from Tier 0. .... 69
30. Physical characteristics of the TS4500 tape
library, Models L25 and D25 ....... 71
31. Physical characteristics of the TS4500 tape
library, Models L55 and D55 ....... 72
32. Physical characteristics of the TS4500 tape
library Model S25 .......... 73
33. Physical characteristics of the TS4500 tape
library, Model S55 .......... 73
34. TS4500 tape library footprint including service
clearance ............. 78
35. Equipment environment specifications for the
TS4500 tape library
1
.......... 86
36. Gas and particulate exposure ...... 87
37. Noise emission values for the TS4500 tape
library models L25, D25, L55, and D55 ... 87
38. Power consumption and cooling requirements
for TS4500 tape library frame models .... 93
39. Specifications for power cords used with the
TS4500 tape library xx5 frame models.... 94
40. Electrical characteristics of the TS4500 tape
library frame models ......... 96
41. FCs for the frame models of the TS4500 tape
library .............. 97
42. Quantity of storage slots in L25, D25, and S25
frames .............. 109
43. Quantity of storage slots in L55, D55, and S55
frames .............. 110
44. LTO 7 and LTO 8 cartridge types ..... 116
45. Compatibility of diagnostic cartridges with
LTO tape drives........... 119
46. Environment for operating, storing, and
shipping the LTO tape cartridges ..... 133
47. Ordering LTO cartridges and media supplies 134
48. Authorized suppliers of custom bar code
labels .............. 136
49. Visual differences between 3592 tape
cartridges ............. 137
50. Environment for operating, storing, and
shipping the IBM 3592 tape cartridge ... 152
51. Descriptions of 3599 tape media features 154
52. Ordering 3592 media supplies by using part
numbers ............. 158
53. Authorized suppliers of custom bar code
labels .............. 159
© Copyright IBM Corp. 2014, 2017 ix
To Next Page
Loading...
Need help?
General