Table 41. FCs for the frame models of the TS4500 tape library (continued)
FC Model CSU Description
1742 Sx4 No TS4500 Control - Upgrade
This includes 1x top panel and 2x Ethernet
cables, card cages, ASCs, BPCs, and LFIs.
1750 TR1 No Left-side and right-side end covers
This feature is required only for the first
top rack ordered (if multiple top racks are
installed on adjacent frames).
1751 TR1 No Power distribution unit
FC 1751 provides one PDU to be mounted
in the top rack. The first PDU in a top rack
does not consume any of the 10U of rack
space. The second PDU in a top rack
consumes 1U of rack space.
Note: A maximum of two FC 1751s can be
ordered.
Prerequisite: For each FC 1751 ordered,
one power cord (FC 9954 thru 9959 or
9966) must also be ordered.
1752 TR1 Both Intelligent PDU (iPDU)
FC 1752 provides one iPDU to be mounted
in the top rack. The first iPDU in a top
rack does not consume any of the 10U of
rack space. The second iPDU in a top rack
consumes 1U of rack space.
Note: A maximum of two FC 1752s can be
ordered.
Prerequisite: For each FC 1752 ordered,
one power cord (FC 9954 thru 9959 or
9966) must also be ordered.
1802 L25, L55 No 1- to 2-frame X-track cable
Non-HA 1 to 2 Frame Track Cable
1806 L25, L55 No 3- to 6-frame X-track cable
Non-HA 3 to 6 Frame Track Cable
1814 L25, L55 No 7- to 14-frame X- track cable
Non-HA 7 to 14 Frame Track Cable-see
3584 X Track Cable Features/Specify codes
for more details. Not supported with FC
2071 or FC 9071.
1818 L25, L55 No 9- to 18-frame X- track cable
Non-HA 9 to 18 Frame Track Cable-see
3584 X Track Cable Features/Specify codes
for more details. Not supported with FC
2071 or FC 9071.
100 IBM TS4500: Introduction and Planning Guide
To Next Page
Need help?
General
