Use for temporary overflow
Use this setting to temporarily store media cartridges in the limited access (Elastic
Capacity) columns. When the dual-access area is 100% full, new cartridges that are
imported from the I/O stations are moved to the Elastic Capacity areas.
Do not use
Choose this setting if you do not want any media cartridges stored in the Elastic
Capacity areas.
Limited Access
The Elastic Capacity slots are limited access when an accessor is placed in service.
When the A accessor is in the Integrated Service Bay A (See ▌1▐ in Figure 8 on
page 30), the B accessor cannot reach columns are 3-8 in that frame. The only
cartridges the B accessor can access cartridges are in column 9 (See ▌3▐ in Figure 8
on page 30) and column 10 on the door-side.
Chapter 1. Overview 29
To Next Page
Need help?
General
