Icom IC-M504 Instruction Manual

42
6
DSC OPERATION
D Receiving an individual call
While monitoring Channel 70 and an individual call is re-
ceived:
➥ The emergency alarm or beeps sound depending on the
received category.
➥ “ Received Individual” appears in the display.
➥ Push [CLR] to stop the beep, then push [DIAL•ENTER] to
reply the call and select the channel specified by the call-
ing station for voice communication (depending on your
replying condition see p. 28 for individual acknowledge-
ment call procedure for details.); push [CLR] to ignore the
individual call.
D Receiving a group call
While monitoring Channel 70 and a group call is received:
➥ The emergency alarm or beeps sound depending on the
received category.
➥ “ Received Group” appears in the display.
➥ Push [CLR] to stop the beep, then push [DIAL•ENTER]
to select the channel specified by the calling station for
voice communication; push [CLR] to ignore the group call.
D Receiving an all ships call
While monitoring Channel 70 and an all ships call is re-
ceived:
➥Theemergencyalarmsoundswhenthecategoryis‘Dis-
tress’or‘Urgency’;beepssoundfor2minutes.
➥ “ Received All Ships” appears in the display.
➥ Push [CLR] to stop the beep, then push [DIAL•ENTER]
to monitor channel 16 for an announcement from the call-
ing vessel; push [CLR] to ignore the call.
25W INT
TAG
Received
Individual
<Paul
<CLR ˘
Beep Off> SAFETY
25W INT
TAG
Received
Group
<Icom
<CLR ˘
Beep Off> SAFETY

Icom IC-M504 Specifications

General

Brand	Icom
Model	IC-M504
Category	Transceiver
Language	English