Icom IC-R8600 User Manual

8-3
Clearing a memory channelCopying the Memory contents
Inserting a blank channel
When you clear a memory channel, you can choose
whether to leave the cleared channel blank as a place
holder, or keeping the deleted channel number.
LYou cannot clear program scan edge channels.
1. Touch the Memory channel number.
• The VFO/MEMORY screen is displayed.
2. Rotate to select the channel you want to clear.
3. When clearing the memory channel contents:
z Touch [M-CLR] (Memory Clear) for 1 second.
• Beeps sound and the selected memory contents are
cleared but the memory channel remains as a blank
channel.
When deleting the channel:
z Touch [M-DEL] (Memory Delete) for 1 second.
• Beeps sound and the memory channel is completely
deleted.
4. Push to close the VFO/MEMORY screen.
You can copy the Memory contents to the VFO.
1. Push
V/M
to select the Memory mode.
2. Select the memory channel to be copied.
3. Hold down
V/M
for 1 second.
• Beeps sound and the selected memory contents are
copied to the VFO.
4. Push
V/M
to select the VFO mode to confirm that
the memory contents were successfully copied.
You can insert a blank channel between 2 Memory
channels.
L This function is convenient to organize your memory
channels.
1. Touch the Memory channel number.
• The VFO/MEMORY screen opens.
2. Select the channel to insert a blank channel below.
3. Touch [M-INS] for 1 second.
• Beeps sound and a blank channel is inserted below
the selected memory channel.
4. Push to close the VFO/MEMORY screen.
Memory
mode
VFO mode
Blank
channel
Blank
channel
Next channel
contents
8
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

Icom IC-R8600 Specifications

General

Brand	Icom
Model	IC-R8600
Category	Receiver
Language	English