Icom IC-R8600 User Manual

10
Clock and Timer
10-2
D Setting the Sleep timer
The Sleep timer automatically turns OFF the receiver
power after the set period of time ends.
• Settable range : 5 ~ 120 minutes (in 5 minutes steps)
1. Hold down for 1 second.
2. Touch [Sleep Timer].
3. Rotate to set the desired length of time.
4. Touch [SET].
• The timer LED lights orange.
• 10 seconds before the sleep timer period ends, the
receiver starts sounding beeps and the timer LED
blinking, then turns OFF.
L When the sleep timer ends, the time period set in
step 3 is cleared.
LEach push of
stops and resumes the timer.
5. To close the TIMER screen, push
EXIT
several
times.
D Setting the Daily timer
The IC-R8600 automatically turns power ON or OFF
on the specied day and time.
LYou can set up to 3 timer slots for different timer setting.
1. Hold down for 1 second.
2. Touch to select a timer slot.
3. Rotate to set each item for the timer slot.
(Example: TIMER1).
LSee page 10-3 for each item's details.
LPush
to reset to the default setting or cancel.
4. After you configure the Timer, touch [<<Set>>].
• The "Set Timer?" dialog appears.
5. Touch [YES].
• The timer LED lights orange.
L When the Power OFF Timer is set: 10 seconds before
the sleep timer period ends, the receiver starts sounding
beeps and the timer LED blinking, then turns OFF.
LEach push of
stops and resumes the timer.
6. To close the TIMER screen, push
EXIT
several times.
Timer
TIMER screen
Timer activated
Reserved channel
Day of the week
Power OFF time
Power ON time
Repeat ON
NOTE: About the Timer accuracy
Since the Sleep timer counts in ‘minute’ steps (not
counts in ‘second’ steps), it may have maximum 59
seconds of error.

Icom IC-R8600 Specifications

General

Brand	Icom
Model	IC-R8600
Category	Receiver
Language	English