Icom IC-R8600 User Manual

9
SCANS
9-3
Temporary Skip Timer (Default: 5min)
Sets the period of time of the Temporary Skip timer.
The Skip timer ignores the Temporary Skip signal for
the set period of time.
• Options: 5, 10 and 15 minutes
SKIP function (Default: ON)
Sets the Skip (SKIP or PSKIP) function.
• OFF: Turns OFF the function.
(You can use the Temporary Skip function (p. 9-10).)
• ON: The scan skips the memory channels that are
programmed as skip channels.
Auto MW (Memory Write) SCAN Memory Clear
(Default: Display Dialog)
Selects the option to start an Auto Memory Write Scan.
• OFF: Starts an MW scan without clearing Auto
Write memory channels (A000 ~ A199).
• Display Dialog:
Asks whether or not to clear Auto Write
memory channels (A000 ~ A199) before
starting an MW scan.
• ON: Automatically clears Auto Write memory
channels (A000 ~ A199) before starting an
MW scan.
Display SCAN Screen (at SCAN START)
(Default: ON)
Selects whether or not to display the SCAN screen when
you push to start a scan (except Priority scan).
• OFF: Does not display the SCAN screen.
• ON: Displays the SCAN screen.
MAIN DIAL Operation (SCAN) (Default: Up/Down)
Selects the scan operation when you rotate
during a scan.
• OFF: Cancels the scan.
• ON: Changes the scan direction.
Rotate right for an up scan, rotate left for a
down scan.
Scan Setting screen
ConguretheScanontheScanSettingscreen.
1. Open the SCAN screen.
MENU
» SCAN
2. Touch [TYPE/SET].
3. Touch [SET].
4. Touch to select the desired item.
5. Touch to select the desired option.
L See the right column for setting items and options.
6. To close the SCAN SET screen, push
EXIT
.
TIP: How to reset to the default setting
Touching the item or its option for 1 second displays
the Quick menu, and then touch “Default” to reset to
the default settings.
SCAN screen
SCAN SET screen

Icom IC-R8600 Specifications

General

Brand	Icom
Model	IC-R8600
Category	Receiver
Language	English