9-6
Auto Memory Write scan
D Auto Memory Write scan operation
1. Open the SCAN screen.
» SCAN
2. Touch [TYPE/SET].
3. Touch [AUTO].
4. Touch [SELECT] to select the item*, then rotate
to change the settings.
* Program Scan Edge number (Example: P00A/P00B),
scan edges (lower and upper frequencies), receive
mode,lterandtuningstep(TS).
L The changed settings are stored in the Program Scan
Edge channel.
Auto Memory Write scan
When a signal is received during a Programmed scan, the
frequency is automatically stored into an Auto Memory
Write channel group (A000 ~ A199).
L When no blank channels is left in group A (A000 ~ A199),
the Auto Memory Write scan automatically cancels.
You can clear the all channels in group A (A000 ~ A199)
every time you start a Auto Memory Write scan.
See page 9-3 for details.
L The channels in group A (A000 ~ A199) are automatically
aligned at the top, and all the blank channels are
removed (A000 ~ A199).
5. Touch [SELECT] several times to exit the edit
mode, then touch [START].
• Theconrmationdialogisdisplayed.
6. Touch [YES].
• The Auto Memory Write scan starts.
L If you do not want to clear the memory channels in
the group A (A000 ~ A199), touch [NO].
LTo cancel the scan, touch [STOP] or push
.
7. To close the SCAN screen, push
.
A000
A002
A001
A199
85.100
80.200
76.500
– – –
– – –
Blinks
Recalls the VFO
frequency before
the scan starts
Jumps to the lower edge
SCAN screen
9
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Scanning
Scan range
Jump
Signal
received
Signal
received
Auto MW CH group
Channel Frequency
Signal
received
The received signal frequency is stored
into an Automatic Memory Write group
To Next Page
Loading...
Need help?
General
