Icom IP501H User Manual

4
SET MODE
4-3
■ Operation in the Set mode
1. Push [FUNC] or [Address] to select an item.
2. Push [▲]/[▼] to set the value.
3. Push [PTT] or [CLR/LOCK] to save the value and exit the Set mode.
• Push [Call history] to execute the following functions.
• LOG
• RESET*
• FIRM UP*
• Delete Recorded Audio
• Delete Bluetooth Device
• Search Bluetooth Device
• Initialize Bluetooth Unit
* After performing these functions, IP501H automatically restarts.
L Updating the  rmware takes approximately 10 minutes.
Setting the Key Touch Beep Volume to “0”
Updating the firmware
– – –
LOG
SET
YES
FIRM UP
SET
10
Key-Touch Beep Vo
SET
Connecting···
FIRM UP···
SET
Updating···
FIRM UP···
SET
0
Key-Touch Beep Vo
SET
Rcvd
FIRM UP
SET
Rcvd
FIRM UP
[FUNC]キー
[▲]/[▼]キー
[履歴]
キー
[CLR/LOCK]
キー
[ アドレ ス 帳 ]
キー
Updating
[FUNC]
[CLR/LOCK]
[▲]/[▼]
[Address]
[Call history]
Example: Setting the Key-Touch Beep Volume
Example: Updating the  rmware

Icom IP501H Specifications

General

Brand	Icom
Model	IP501H
Category	Radio
Language	English