4
SETTINGS FOR A REMOTE STATION PC
67
■ Audio adjustment using the Remote Utility
While connected to a radio, you can adjust the received and transmit audio volume through the network using the
Remote station’s Remote Utility.
The description in this section is based on the assumption that the connection to the radio has succeeded
(“<<Connected>>” is displayed under the radio name).
D Received audio volume adjustment
1. In the Remote station’s Remote Utility, open the
Radio List screen.
2. Select a radio with “<<Connected>>” under its
name.
4. Slide the adjustment bar on the Volume eld
up or down to adjust the received audio volume
level.
L Click <Mute> to mute the audio, and click once
again to hear the audio.
5. Click <Close> to close the screen.
NOTE:
• The AF adjustment bar on the Volume eld moves
together with the [AF] control of the Remote
Controller. However, if you use another control
software, the audio volume level on the network
can only be adjusted with the Remote Utility.
• You cannot adjust the received audio volume level
of the radio’s speaker, with the Remote Utility.
Use the [AF] control on the radio to adjust it.
1Click
2Select
3Click
4Adjust
5Click
To Next Page
Loading...
Need help?
General
