To Next Page

To Previous Page

Connecting an IBM-Compatible Laptop Computer

1 Plug the end of the CableWizard computer cable into the

video connector on your computer.

NOTE: Many laptop computers

do not automatically turn on their

external video port when a second-

ary display device such as a projec-

tor is connected. Refer to your

computer manual for the com-

mand that activates the external

video port. Activation commands

for some laptop computers are

listed in the Appendix of this man-

ual on page 55.

2 Plug the end of the CableWizard computer cable into the

connector on the CableWizard.

FIGURE 10

Connecting the CableWizard computer cable to an IBM-compatible laptop computer

NOTE: If you don’t want audio or

mouse control, you can use the

CableWizard Lite. CableWizard

Lite is ordered separately. See

“Accessories” on page 53.

Do you want to play your computer’s audio on the projector?

1 Plug either end of the CableWizard audio cable into the audio

connector on your computer.

2 Plug the other end of the CableWizard audio cable into the

connector on the CableWizard.

computer cable

Downloaded from ProjectorsManual.com Manuals

InFocus LitePro 610 User Manual

Other manuals for InFocus LitePro 610