InFocus LitePro 610 User Manual

13
Connecting a Macintosh Desktop Computer
1 Locate the cable that connects the monitor to your computer.
Unplug it from the computer.
2 Plug the end of the CableWizard computer cable into the
video connector on your computer.
3 Plug the end of the CableWizard computer cable into the
connector on the CableWizard.
FIGURE 12
Connecting the CableWizard computer cable to a Macintosh desktop computer
Do you want to display the image on your computer’s monitor as
well as on the projection screen?
1 Plug the monitor’s cable into the connector on the
CableWizard.
Do you want to play your computer’s audio on the projector?
1 Unplug the audio cable, if present, from your computer.
2 Plug either end of the CableWizard audio cable into the audio
connector on your Macintosh.
3 Plug the other end of the CableWizard audio cable into the
connector on the CableWizard.
computer cable
Downloaded from ProjectorsManual.com Manuals

InFocus LitePro 610 Specifications

General

Brand	InFocus
Model	LitePro 610
Category	Projector
Language	English