34
Using the Projector
Display Menu Functions
FIGURE 31
Display menu
Brightness
NOTE: Changing the brightness
using the menu is the same as
changing it using the remote or
keypad.
Adjusting the brightness changes the intensity of the image.
• Press the left mouse button to darken the image.
• Press the right mouse button to lighten the image.
Contrast
Contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
• Press the left mouse button to decrease the contrast.
• Press the right mouse button to increase the contrast, making
the blacks appear blacker and the whites appear whiter.
Tint
Tint adjusts the red-green color balance in the projected image.
Changing the Tint setting has no effect on PAL or SECAM video
sources.
• Press the left mouse button to increase the amount of green in
the image.
• Press the right mouse button to increase the amount of red in
the image.
Reset All
Click either mouse button to reset all the options (except Lan-
guage) in all the menus to their default settings. This also returns
Freeze and Mute to their default (off) settings.
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
Need help?
General
