148
Controlling Other Components—Continued
By pressing the Remote Mode button that’s been pro-
grammed with the remote control code for your CD
player, CD recorder, or MD recorder, you can control
your player with the following buttons.
The [CD] button is preprogrammed with the remote con-
trol code for controlling an Integra/Onkyo CD player.
For details on entering a remote control code for a differ-
ent component, see page 142.
a On, Standby buttons
Set the component to On or Standby.
b Arrow [q]/[w]/[e]/[r] and Enter buttons
Used to navigate menus and select items.
c Setup button
Used to access the Integra/Onkyo CD player’s set-
tings.
d [1], [3], [2], [5], [4], [7], [6]
buttons
Play, Pause, Stop, Fast reverse, Fast forward, Previ-
ous, and Next.
e Repeat button
Used with the repeat playback function.
f Search button
Used to locate specific points.
g Number buttons
Used to enter track numbers and times for locating
specific points. The [+10] button works as a +10
button or “--/---” button.
h Display button
Displays information about the current disc or track,
including elapsed time, remaining time, total time,
and so on.
i Muting button (62)
Mutes or unmutes the AV controller.
j Disc +/– button
Selects discs on a CD changer.
k VOL [q]/[w] button (60)
Adjusts the volume of the AV controller.
l Random button
Used with the random playback function.
m Play Mode button
Selects play modes on components with selectable
play modes.
n CLR button
Cancels functions and clears entered numbers.
Note:
With some components, certain buttons may not work as
expected, and some may not work at all.
Controlling a CD Player, CD Recorder or MD Recorder
n
m
l
i
h
k
g
d
f
e
c
b
a
j
Press the appropriate Remote
Mode button first.
To Next Page
Loading...
Need help?
General
