150
Controlling Other Components—Continued
r Play Mode button
Selects play modes on components with selectable
play modes.
Works as a Resume button when used with a DS-A2
RI Dock.
s Random button
Used with the shuffle function.
Note:
With some components, certain buttons may not work as
expected, and some may not work at all.
By pressing the Remote Mode button that’s been pro-
grammed with the remote control code for your cassette
recorder, you can control your cassette recorder with the
following buttons.
The [TV/Tape] button is preprogrammed with the
remote control code for controlling an Onkyo cassette
recorder when used with an u connection.
For details on entering a remote control code for a differ-
ent component, see page 142.
On twin cassette decks, only Deck B can be controlled.
a On, Standby buttons
Turns the cassette recorder on or off.
b Previous and Next [7]/[6] buttons
The Previous [7] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [6] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [7]/[6] buttons may not work prop-
erly with some cassette tapes.
c Fast Reverse and Fast Forward [5]/[4]
buttons
The Fast Reverse [5] button starts fast reverse.
The Fast Forward [4] button starts fast forward.
d Reverse Play [t] button
Starts reverse playback.
e Play [1] button
Starts playback.
f Muting button (62)
Mutes or unmutes the AV controller.
g VOL [q]/[w] button (60)
Adjusts the volume of the AV controller.
h Stop [2] button
Stops playback.
Notes:
• An Onkyo cassette recorder connected via u can
also be controlled in Receiver mode.
• With some components, certain buttons may not work
as expected, and some may not work at all.
Controlling a Cassette Recorder
h
c
g
b
e
f
d
b
c
a
Press the appropriate Remote
Mode button first.
To Next Page
Loading...
Need help?
General
