Intel EM64T - Celeron D 336 Boxed Ena User Manual

Introduction
R
10 Thermal/Mechanical Design Guide
1.1.3 Document Scope
This design guide supports the following processors:
• Pentium 4 processors 570/571, 560/561, 550/551, 540/541, 530/531, and 520/521 in the 775-
land LGA package
• Pentium 4 processor 670/672, 660/662, 650, 640, and 630 in the 775-land LGA package
• Pentium 4 processor Extreme Edition in the 775-land LGA package
In this document, when a reference is made to “the processor” and/or “the Pentium 4 processor in
the 775–Land LGA package”, it is intended that this includes all the processors supported by this
document. If needed for clarity, the specific processor will be listed.
In this document, when a reference is made to “the datasheet”, the reader should refer to either the
Intel
®
Pentium
®
4 Processors 570571, 560/561, 550/551, 540/541, 530/531, and 520/521
∆
– On
90 nm Process in the 775–Land LGA Package and Supporting Hyper-Threading Technology
Datasheet or the Intel
®
Pentium
®
4 Processor 6xx
∆
Sequence and Intel
®
Pentium
®
4 Processor
Extreme Edition Datasheet – On 90 nm Process in the 775-land LGA Package, supporting Intel
®
Extended Memory 64 Technology
Φ
, and supporting Intel
®
Virtualization Technology as
appropriate. If needed for clarity, the specific processor datasheet will be referenced.
Chapter
2 discusses package thermal mechanical requirements to design a thermal solution for the
Pentium 4 processor in the 775–land LGA package in the context of personal computer
applications. Chapter
3 discusses the thermal solution considerations and metrology
recommendations to validate a processor thermal solution. Chapter
4 addresses the benefits of the
processor’s integrated thermal management logic for thermal design.
Chapter
5 provides information on the common Intel reference thermal solution for the Pentium 4
processor in the 775–land LGA package discussed in this document. Chapter
6 discusses the
implementation of acoustic fan speed control.
THE PHYSICAL DIMENSIONS AND THERMAL SPECIFICATIONS OF THE PROCESSOR
THAT ARE USED IN THIS DOCUMENT ARE FOR ILLUSTRATION ONLY. REFER TO
THE DATASHEET FOR THE PRODUCT DIMENSIONS, THERMAL POWER DISSIPATION
AND MAXIMUM CASE TEMPERATURE. IN CASE OF CONFLICT, THE DATA IN THE
DATASHEET SUPERSEDES ANY DATA IN THIS DOCUMENT.

Intel EM64T - Celeron D 336 Boxed Ena Specifications

General

Brand	Intel
Model	EM64T - Celeron D 336 Boxed Ena
Category	Computer Hardware
Language	English