To Next Page

To Previous Page

v240M – Marine Satellite Communication System

102

System Management

System MODE

BACKup and restore

MODE

Setup mode

SETUP MODE ?

YES NO

1. Press the LEFT arrow key to move the cursor to YES and press the OK key to enter SETUP

mode.

+ANTENNA +SATELLITE

+SYSTEM +INSTALLATION

2. Press the DOWN arrow key to move the cursor to SYSTEM and press the OK key to enter it.

+SET LOCAL +SET LOCATION

+MODEM PORT

+MANAGEMENT

3. Press the arrow keys to move the cursor to BACKUP & RESTORE MODE and press the

OK key to enter it.

Select process type

SELECT PROCESS TYPE

BACKUP USER DATA

4. Press the UP and DOWN arrow keys to SELECT PROCESS TYPE*

Press the OK key to set the parameter and the processing message will be displayed.

SELECT PROCESS TYPE*

BACKUP USER DATA : Backs up the antenna's user settings.

RESTORE USER DATA: Restores the user settings to the antenna.

UPGRADE FROM USB : Upgrades the antenna by accessing a FPW le stored on a USB.

COPY LOG TO USB : Copies the data log from the antenna to a USB drive.

BACKUP TO USB : Backs up the antenna user settings to a USB drive.

RESTORE FROM USB : Restores the antenna by using the backup user data from a USB.

UPGRADE ACU-REMOTE : Upgrades the iARM processor by retrieving a TGZ le stored on

a USB drive.

UPGRADE FROM USB / COPY LOG TO USB / BACKUP TO USB / RESTORE FROM USB /

UPGRADE ACU-REMOTE : These items are shown only when the USB memory stick is connected

to the ACU.

BACK UP ANT INFO

DO NOT TURN OFF!

Intellian v240M User Manual

Questions and Answers: