Appendix A — Printer Specifications
PF8d and PF8t Desktop Printer User’s Guide 73
The length of each copy is decided by the size of the print image and
any additional media feed is decided by the Q command. Continuous
stock cannot be used in the Autosensing mode. For more
information, see the ESim for the PC4, PF8, PD41, and PD42 Printer
Programmer’s Reference Manual.
Transfer Ribbons
Intermec offer three types of thermal transfer ribbons optimized for
different purposes.
General Purpose (GP/TMX1500)
General purpose transfer ribbons allow high speed printing and give a
good printout but are somewhat sensitive to smearing. These ribbons
are best suited for uncoated and coated papers.
High Performance (HP/TMX2200)
High performance transfer ribbons allow high speed printing and give
a highly readable and defined printout on most face materials with
smooth surfaces. They have good “smear resistance” and are most
suitable for intricate logotypes and images on matte coated papers
and synthetic face materials.
High Resistance (HR/TMX3201/TMX3202)
High resistance transfer ribbons give an extremely durable printout
that is resistant to most chemical agents and high temperatures.
However, such transfer ribbons set high demands on the receiving
face material, which must be very smooth, like polyesters.
Media Specifications
Measurement Value
Maximum tag or strip width 116.0 mm (4.57 in)
Minimum tag or strip width 25.0 mm (1.0 in)
Note: Intermec thermal transfer ribbons are engineered specifically for
the PF8 printheads.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
