INTEX® TEST STRIPS (PACKED WITH THE PRODUCT)
The Test Strips can test the "Free Chlorine", "pH", "Calcium Hardness" and "Total Alkalinity"
levels
at
the same time. We recommend that you test the water chemistry weekly, and maintain
the chlorine concentration at 0.5-3 ppm.
Directions and Use
1. Dip the entire strip into the water and remove immediately.
2. Hold the strip level for 15 seconds. Do not shake excess water from the strip.
3. Now compare the strip pad to the color chart on the packaging label. If necessary, adjust the
chemical level in the pool water. It is very important,
to
use the proper technique when
testing the water's chemical level. Read and follow the written strip instructions carefully.
To Next Page
Loading...
Need help?
General
