24
5 Pushing the scooter by hand
The motors of the scooter are equipped with automatic brakes, preventing the scooter from rolling
away out of control when the power supply is switched off. When pushing the scooter, the magnetic
brakes must be disengaged.
5.1 Disengaging Motors
Danger of the vehicle running away!
• When the motors are disengaged (for push operation), the electromagnetic motor brakes are
deactivated! When the vehicle is parked, the levers for engaging and disengaging the motors
must without fail be locked firmly into the "DRIVE" position (electromagnetic motor brakes
activated)!
NOTE:
The Scooter will start braking above a certain pushing or freewheeling speed if the drive has
been disengaged. This is a safety function, and ensures that the Scooter cannot be pushed or
freewheeled too quickly. In order to push the Scooter normally again, simply stop briefly and
continue pushing at a lower speed.
To Next Page
Loading...
Need help?
General
