29
NOTE:
To brake quickly, simply let go of the drive lever. It will then automatically return to the middle
position. The Scooter will brake.
6.3 Activating and deactivating acoustic signals
The Scooter electronic system can be programmed to emit an acoustic signal in the following
situations:
• battery capacity low (activated in delivery status)
• direction indicators actuated (deactivated in delivery status)
• hazard lamps actuated (deactivated in delivery status)
The electronic system must be switched off in order
to activate or deactivate an acoustic signal for
particular functions, and a particular keystroke
combination needs to be entered when switching on
again.
After a signal for a particular function has been
successfully activated/deactivated, a combination of
LEDs on the battery charge display will blink as a
confirmation. The LEDs are numbered as shown on
the right:
To Next Page
Loading...
Need help?
General
