16
LBK System Series| Instruction manual v1.2 SET 2021 |SAF-UM-LBKBus-en-v1.2|© 2020-2021 Inxpect SpA
3. Get to know LBK System Series
Contents
This section includes the following topics:
3.1 LBK System Series 16
3.2 LBK System Series control units 18
3.3 LBK-S01 sensors 24
3.4 Inxpect Safety application 24
3.5 Fieldbus communication 26
3.6 Modbus communication 27
3.7 System configuration 28
Product label description
The following table describes the information contained in the product label:
Part Description
DC "yy/ww" : year and week of the product manufacture
SRE Safety Radar Equipment
Model Product model (e.g. LBK-S01, ISC-B01)
Type Product variant, used for commercial purposes only
S/N Serial number
3.1 LBK System Series
3.1.1 Definition
LBK System Series is an active protection radar system that monitors the dangerous areas of machinery.
3.1.2 Special features
Some of the special features of this protection system are the following:
l up to two safe detection fields to signal proximity or prepare the machinery for stopping
l Ethernet safety Fieldbus to safely communicate with the PLC of the machinery (if available)
l possibility to switch dynamically between different preset configurations (max 32 through Fieldbus, if
available, and max 4 with digital inputs) to adapt to the surrounding reality
l three configurable sensitivity levels
l muting on the entire system or only on some sensors
l immunity to dust and smoke
l reduction of undesired alarms caused by the presence of water or processing waste
l communication and data exchange through Modbus (if available)
To Next Page
Loading...
Need help?
General
