5.5.4 50° field of view
WARNING! It is only possible to check if the other configurations respect the performance levels
required by the application through the validation procedure (see "Validate the safety functions" on
page68).
5.5.5 Calculate the real detection distance
The actual detection distance Dalarm is the value to be entered on the Configuration page of the Inxpect Safety
application.
Dalarm indicates the maximum distance between the sensor and the object to be detected.
5.6 Outdoor installations
5.6.1 Position exposed to precipitation
If the sensor installation position might be exposed to precipitation that can cause undesired alarms, it is
recommended to take the following precautions:
l make a cover to protect the sensor from rain, hail or snow
l position the sensor so that it does not frame the ground where puddles might form
5. Sensor position
LBK System Series| Instruction manual v1.2 SET 2021|SAF-UM-LBKBus-en-v1.2|© 2020-2021 Inxpect SpA
61
To Next Page
Loading...
Need help?
General
