26
LBK System Series| Instruction manual v1.2 SET 2021 |SAF-UM-LBKBus-en-v1.2|© 2020-2021 Inxpect SpA
3. Get to know LBK System Series
Page Function
Settings Configure the sensors.
Configure the auxiliary inputs and outputs function.
Configure, show and change the network parameters (if available).
Configure, show and change the Modbus parameters (if available).
Configure, show and change the Fieldbus parameters (if available).
Update the firmware.
Perform the configuration backup and load a configuration.
Download the log.
Other general functions.
REFRESH
CONFIGURATION
Refresh configuration or ignore unsaved changes.
User
Enable access to the configuration functions. Admin password required.
Disconnect
Close the connection with the device and allow to connect to another device.
Change the language.
3.5 Fieldbus communication
3.5.1 Fieldbus support
The safety communication on the Fieldbus interface is supported only in the ISC-B01 control unit.
3.5.2 Communication with the machinery
The Fieldbus makes the following actions possible:
l to choose from 1 to 32 preset configurations dynamically
l to read the status of the inputs
l to control the outputs
l to mute the sensors
l to enable the restart signal
For details, see the PROFIsafe communication Reference guide.
To Next Page
Loading...
Need help?
General
