ISHIDA WM-NANO Service Manual

Chapter 3 Adjustment Mode
6） Remove screws (5) to remove the right lateral cover of the machine.
NOTE:
In removing the right-side cover, pay attention not
to deform the hinge of the cover.
7） Release the coupling between the infeed arm
and the infeed bar.
c Remove the screw (1) of the infeed arm.
d Lift the notch of the infeed arm coupling part by sliding the notch to the right.
Loosen the screws
on the front side.
Remove the
screw
Loosen the screws.
Right lateral cover
Notch of the infeed arm
coupling part
Infeed bar
Tab
3-3

ISHIDA WM-NANO Specifications

General

Brand	ISHIDA
Model	WM-NANO
Category	Packaging equipment
Language	English