ISHIDA WM-NANO Service Manual

Chapter 5 Troubleshooting
ID NO. TITLE ERROR CONTENTS SOLUTION
0498 PROBLEM ON
WRAPPING PART
System error for wrapper.
A bug happened at wrapper
program.
Reboot.
5.3.5 Error relates to wrapper (Code 500s)
ID NO. TITLE ERROR CONTENTS SOLUTION
0524 FAILED TO
OUTFEED THE
ITEM
Failed to discharge item.
It did not cut the sensor for
detecting the item at the
discharge unit at wrapping the
item.
- Item dropped inside of the
wrapper during the discharging
movement.
- Wrapper movement was done
when there is no item inside of
the wrapper.
Ex) removed the item before it
was discharged.
[RETURN]
Remove the item inside, and press
[RETURN].
<Check Point>
1. Product discharge detection sensor
[B5] emitter side and [B8] receiver
side
2. XJ7 of P-1004
0598 REMOVE
PRODUCT
Forgot to remove the item at the
discharge unit.
Tried to wrap the next item
without taking the item at the
discharge unit.
Or, tried to discharge the item left
on the lift unit.
[OK]
Remove the product at the discharge
unit. (auto release)
<Check Point>
Check points for the case in which an
error occurs when there is no product.
1. Product discharge detection sensor
[B5] emitter side and [B8] receiver
side
2. Discharge unit hand insertion sensor
[B4] emitter side and [B7] receiver
side
3. XJ7 of P-1004
5.3.6 Error related to printer (Code 700s)
ID NO. TITLE ERROR CONTENTS SOLUTION
5-25

ISHIDA WM-NANO Specifications

General

Brand	ISHIDA
Model	WM-NANO
Category	Packaging equipment
Language	English