Chapter 1 Overview
1-2
Item Details
Ishida Wrap (Type M only): Content height of a tray must be up to
100 mm.
Wrapping Tray Material
PSP, PP
Wrapping Tray Shape Rectangle (PSP, PP)
Legged, soft, and/or atypical trays are not supported.
Film Size M Type: 350/400/450 mm
(13.7/15.75/17.7")
L Type: 400/450/500/550/560 mm
(15.7/17.72/19.69/21.65/22")
Film Roll Length External Film Diameter:
・M Type: 165 mm (6.3") or less
(Ishida Wrap Super: 1200 m roll, others: 1000 m roll)
・L Type: 200 mm (7.8") or less (1500 m roll)
Film Type Polyolefin, polyvinyl chloride (for machine winding)
Recommended Film Ishida Wrap (Polyvinyl chloride)
Ishida Wrap Super (Polyolefin)
Infeed & Conveyor Conveyor by latch (fixed speed)
Film Replacement To be set on the roller and replaced from the side
Film Transfer Method Belt-Transfer Full-Cut
Film Weld Roller type with cartridge heater
* Do not leave a tray on the heater
If sealing strength is not enough, press it on the roller again.
Cleanability Detachable lift head (water washable, except for the movable block of
the head)
Detachable weighing table (water washable)
Detachable garbage plate of the weighing block (water washable)
1.1.3 Operation Unit Specifications
Item Details
Operation Unit UNI-7 RP
Option Wand scanner
* Must not be attached by the customer
Standard input/output USB x 1
OF slot x 1
Ethernet x 1
Output for cash drawer x 2
* RS232C is used for a link to the wrapper.
1.1.4 Weighing Unit Specifications
Item Details
Weighing Capacity M Type: 6 kg/15 kg
L Type: 15 kg
Scale Interval 0 to 6 kg: Scale interval of 2 g
6 to 15 kg: Scale interval of 5 g (multi-range)
Weighing Precision 1/3000 (Precision class based on new the measurement standard in
Japan: Class III)
1.1.5 Options
Item Details
To Next Page
Loading...
Need help?
General
