To Next Page

To Previous Page

System Commands

Command syntax

SYST:LOC

Arguments

None

SYSTem:RWLock[:STATe]

This command is transmit through RS232 interface, the same function as

SYSTem:REMote, but the difference is: this command can lock “LOCAL”

button as well. When this command is executed, the “Local” button can’t

switch to local control mode.

Command syntax

SYST:RWL

Arguments

None

SYSTem:COMMunicate:GPIB:RDEVice:ADDRess

This command is used to set the device address of the GPIB communication.

Command syntax

SYSTem:COMMunicate:GPIB:RDEVice:ADDRess {<NR1>}

Arguments

1~30

Query syntax

SYSTem:COMMunicate:GPIB:RDEVice:ADDRess?

Returns

<NR1>

SYSTem:COMMunicate:LAN:CURRent:ADDRess

This command is used to set IP address of power supply. (LAN related

instructions only apply to IT6300C series instruments)

Command syntax

SYSTem:COMMunicate:LAN:CURRent:ADDRess <STR>

Arguments

<STR>

Unit

None

ITech IT6322A Programming Guide

Other manuals for ITech IT6322A