ITech IT6322A Programming Guide

System Commands
Copyright© Itech Electronic Co., Ltd. 19
Related Command
STATus:QUEStionable:ENABle
STATus:QUEStionable:CONDition?
This command can be used to read the value of the query condition register.
When the value of a bit in the query condition register changes, the
corresponding bit in the query event register is set to 1.
Query syntax
STATus:QUEStionable: CONDition?
Arguments
None
Returns
<NR1>
STATus:QUEStionable:ENABle
This command edits the enable register value of query event. setting parameter
can determine which bit value of query event register is 1 and the bit will cause
QUES of status byte register to be 1.
Command syntax
STATus:QUEStionable:ENABle <NRf>
Arguments
0~255
Default set
Refer to *PSC command
Example
STATus:QUEStionable:ENABle 128
Query syntax
STATus:QUEStionable:ENABle?
Returns
<NR1>
Related Command
*PSC
STATus:PRESet
This command is used to clean status event.

ITech IT6322A Specifications

General

Brand	ITech
Model	IT6322A
Category	Power Supply
Language	English