J-100
11.7 Programming the Temperature Format
To program the temperature format, follow the steps below:
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current settings
will remain active.
1. Press until you get to the “TEMP” Menu. The display will scroll
“TEMPERATURE FORMAT.” After the second scroll, if no action is
taken, the system will revert back to the Main Menu.
2. Press or to switch between °F or °C. Once selected
press
1
to save the change. The system will return to the
“TEMPERATURE FORMAT” Menu.
11.8 Programming the Language
Your new hot tub comes with four language display options.
To program the display language, follow the steps below:
Note: If no button is pressed within 5 seconds of each selection the
screen will revert back to the Main Menu and the current settings will
remain active.
1. Press until you get to the “LANG” Menu. The display will scroll
“LANGUAGE MENU.” After the second scroll, if no action is taken,
the system will revert back to the Main Menu.
2. Press or to display the current language.
3. Press or to scroll through the languages available. The
choices are English, French, German and Spanish. Once a selection
is made, press
1
to save the change. The system will return to the
“LANGUAGE MENU.”
11.9 Programming the Lock Feature
You can prevent users from changing certain features of the
hot tub. It is important to realize that after either mode is
enabled, there is no physical pad lock indicator on the topside
control panel display to inform the user that either mode is active. If
some or all topside control panel buttons are non-responsive, either lock
mode IS ENABLED. There are three lock modes to choice from:
Note: If no button is pressed within 5 seconds of each selection the
screen will revert back to the Main Menu and the current settings will
remain active.
• Access Lock will disable the ability to manually activate or adjust any
feature of the hot tub. All scheduled operations will still be preformed.
• Settings Lock will disable the ability to change any of the user
settings. You can still activate the jet pumps and lighting. All
scheduled operations will still be preformed.
• Set Temperature Lock will disable the temperature up and down
buttons to prevent unauthorized temperature adjustments.
33
To Next Page
Loading...
Need help?
General
