J-100
To Clean Filter:
1. Turn off power to the spa at the home’s breaker panel or select
the “AL” (“ACCESS LOCK”) mode (page 33) to disable all spa
functions.
2. Remove the lter strainer lid assembly by rotating it
counterclockwise, Figure A.
3. Remove the lter cartridge by rotating it counterclockwise to
unthread it from the lter wall tting (Figure B). Then lift it straight up
to remove from lter well (Figure C).
4. Using a garden hose with a high-pressure nozzle, rinse debris from
the lter pleats beginning at the top and working your way downward
(Figure D). Continue, one section at a time, until you have rinsed all
of the lter’s pleats.
To ensure optimum performance, clean skimmer basket and lter
cartridge once a month or as necessary, depending on use.
Periodically, the lter cartridge will need a more thorough cleaning to
remove imbedded oils and minerals. For this, we suggest cleaning as
illustrated followed by soaking the lter overnight in a plastic container
lled with a solution of water and specially formulated lter cleanser
available from your authorized Jacuzzi dealer. The average life
expectancy of each lter is approximately two years with proper care and
water quality maintenance. Replacement cartridges may be purchased
from your authorized Jacuzzi dealer.
12.2 Draining and Relling
About every 3 months, you will want to replace the spa’s water. The
frequency depends on a number of variables including the amount of
use, attention paid to water quality maintenance, etc. You will know it is
time for a change when you cannot control sudsing and/or you can no
longer get the normal feel or sparkle to the water even though the key
water balance measurements are all within the proper parameters.
SPA SHELL
SPA SHELL
SPA SHELL
CARTRIDGE
Figure CFigure B
Figure D
Figure A
36
To Next Page
Loading...
Need help?
General
